TEQCLEAN
- CARING FOR YOUR TEQTON FLOOR

Just like all industrial coatings and floors, Teqton floors have to be maintained.

The maintenance includes three phases, which all serve to improve durability, prevent soiling and optimise dust binding as well as to ensure that the floor looks presentable:

Proofing
Is carried out to make the fl oor dirt-repelling and dust-binding
Daily cleaning
To remove soiling and to ensure continued dirt repelling and dust binding, as far as possible
Thorough cleaning
When continuous use makes this necessary.

Teqclean is used for basic proofing as well as for periodical cleaning and maintenance of Teqton floors.

STEP 1 - PROOFING OF NEW FLOOR

Vacuum the Teqton floor thoroughly, as the surface must be dust-free before the proofing can be started.
After this, wash the floor with a mixture of 4 dl of Teqclean and 10 litres of water. Leave the fl oor washing water as a water fi lm that you let dry. The best way to do this is by using a combination machine/floor washingmachine,
which can lay out the mixture evenly all over the floor. After at least half an hour, the excess washing water can be soaked up with the machine.
In order to satiate the floor, repeat the above procedure 2-3 times. After this, the floor is ready for daily use and cleaning.

STEP 2 - DAILY CLEANING

The best mixture for daily cleaning is ½ - 1 dl of Teqclean and 10 litres of water. The best way to wash the floor is with a combination machine/floor washing machine with a hard nylon brush.

STEP 3 - THOROUGH CLEANING

When needed, the Teqton fl oor surface is given a thorough cleaning. This is done to remove excess/accumulated cleaning film.
Wash the fl oor with 5 dl of Teqclean mixed with 10 litres of water.
The best way to carry out the thorough cleaning is with a machine with a hard nylon brush. Immediately after the thorough cleaning, you rinse the floor with clean water. After this, the floor is ready for continued daily cleaning..

DOSAGE INSTRUCTIONS

Proofing: 4 dl of Teqclean and 10 litres of water
Daily cleaning: ½ dl of Teqclean and 10 litres of water
Thorough cleaning: 5 dl of Teqclean and 10 litres of water

IMPORTANT

If the floor has been used before proofing, the floor has to be given a thorough cleaning in order to remove old dirt and soap residue from the surface before the floor is proofed.

If the floor is cared for properly, the floor will look nice and presentable for a long time.

DO YOU WANT TO ORDER?

If you want to give the floor some care, then just send us an email with your order.

Maintenance of your TEQTON floor

Once the floor is in use, the daily cleaning is the most important element in keeping the floors healthy.
In particular, the choice of soaps for the floors has a great influence, not only on the appearance, but also the ability of the floor to remain dirt-repellent and chemical-resistant.