TEQBASE
- SUB-BASE FOR TEQPLAN

The ideal sub-base for industrial floors! Jointless, large load capacity, quality control.

Teqbase is used as sub-base for floors in all types of industrial and storage halls. In many cases, it constitutes an alternative to armoured cement layers. Teqbase is applied as sub-base for all types of Teqton wear layers (e.g. Teqplan, Teqoton and Latexfalt) as well as for quarry tiles and marble split tiles.

TEQBASE - APPLY A SYSTEM FROM THE OUTSET

An industrial floor is not a typical commodity; it needs to fit various needs and demands that can only be pinpointed by means of personal consultancy and individual solutions. We offer you complete system solutions where sub-base, covering layer and surface treatment supplement each other to create high-quality results and functionality.

TEQBASE IS THE BASE

The low-waste sub-base Teqbase is made up by a mixture of selected high-quality fixing agents and a gravel-sand-mixture according to a fixed grading curve..

WE ARE CRITICAL OF ACCURACY

In order to obtain the best result possible, we apply the latest laser technology in order to control the levelling electronics within our special machines for laying down floors. Following annealing, and in accordance with your wishes, we lay down a Teqton wear layer, also featuring a jointless surface, on top of the sub-base Teqbase.
In this way, you avoid expensive expansion joints.

On the joint-free Teqbase base layer, after sufficient hardening, a Teqplan layer adapted to the customer's needs is laid. This is also done with a joint-free surface.

A RATIONAL FLOORING SYSTEM

Normally, Teqbase is laid down prior to hall mounting. A team of workers lay down more than 1,500 m2 per day and after a few days, the Teqbase sub-base may be utilised as installation platform for heavy hoisting gear and transport machinery. This is a great advantage for owners and contractors alike, saving both time and money. The wear layer is laid down just before the hall is to be used. Thanks to the extremely short hardening time of the wear layer, the floor is able to deal with full loads after just 4-6 days.

OUR KNOW-HOW IS YOUR ADVANTAGE

Include the Teqbase system into your planning phase – it pays off. Our specialists possess the know-how and experience needed to keep costs at a minimum. Contact us now!

FURTHER INFORMATION?

For further information about data sheets on:

Connection of other building elements
Inspection
Reference list

Please contact our office.

TECHNICAL DATA

Sub-base
Portable backfilling of sand, nut stones or stable gravel, possibly hard lagging.

Joints
Normally a jointless surface. Separation joints in Teqbase by all foundations and adjacent building elements as well as thin cold joints. System solutions are created for connections.

Normal thickness
On average 18 cm – can be made thicker if needed.

Working temperature
Frost-free.

Load
Depending on sub-base and construction thickness: Surface loads of up to 200 kN/m² Point loads of up to 100 kN on 0.1 x 0.1 m. When dealing with special loads and complicated sub-bases, special geotechnical tests on consolidation conditions should be carried out.

Flatness
In accordance with German DIN 18202, table 3, line 2.

Anchorage
Teqbase facilitates anchorage of bearings and element supports. When dealing with heavy loads, pull tests should be carried out. Suitable for installing machines and shelves.

Daily output
Around 1,500 m² per day per work team.

TEQPLAN

Teqplan is the next step in the construction of your new floor. Teqplan is especially suitable wherever water, oil, fuel, various chemicals, etc. attack the floor. Teqplan is thus ideal for warehouses, productionhalls and workshops.

GRINDING AND POLISHING

As an extra finish on Teqtons jointfree floors, they can be given different forms of grinding or polishing. This allows for the finished surface to modified to any use.